غانغبوالتكنولوجيا البيئية
UV photocatalytic odour purification cabinet with access doors and control panel

VOCs Exhaust Treatment

UV Photocatalytic Odour Purifier

GP-UV Series

UV lamp and photocatalyst unit for low concentration odour and organic exhaust, used alone or downstream of scrubbing and adsorption.

Air volume
2,000 - 60,000 m³/h
Resistance
≤ 300 Pa
UV lamp
185 nm / 254 nm, quartz tube
Position
Standalone or after scrubber / carbon unit

Data needed for an accurate quotation

  • Air or gas volume at operating temperature
  • Dust or pollutant type and concentration
  • Required outlet concentration or standard
  • Available plot size and power supply

Technical parameters

Grouped specification sheet

Technical parameters
Performance
Air volume range2,000 - 60,000 m³/h
Suitable concentrationLow concentration, high volume odour and organic gas
Resistance≤ 300 Pa
Residence timeSet by lamp density and chamber length
Structure
CasingCarbon steel painted or 304 stainless steel
Lamp moduleRemovable drawer type for maintenance
PhotocatalystTiO₂ carrier module, replaceable
Pre-filterRequired upstream where dust or oil mist is present
Electrical and safety
Power supply380 V / 50 Hz, customisable to 220 V / 60 Hz
Lamp controlGroup switching with running hours counter
InterlockFan interlock and door safety switch

Values shown are the standard manufacturing range. Final parameters are calculated from your gas volume, dust or pollutant load, temperature and the emission standard in force at your site.

Customisation options

  • Lamp quantity and chamber length set by concentration and flow
  • Stainless steel casing for humid and corrosive service
  • Combined skid with spray scrubber or activated carbon stage
  • Voltage and frequency for the destination grid

Export packing & delivery

  • Unit shipped as a complete skid with lamp modules removed
  • Quartz lamps packed separately in protective cases
  • Spare lamps and photocatalyst modules included on request

Drawings, assembly sequence, manual and test records are supplied with every shipment. On-site engineer dispatch can be arranged for complete system projects.

Read the export and installation checklist

Matched equipment

Systems usually supplied together

Collector, fan, discharge valve and conveying equipment designed as one train so interfaces and spares stay consistent.

Activated carbon adsorption unit for organic exhaust treatment at a factory

VOCs Exhaust Treatment

Activated Carbon Adsorption Unit

GP-AC Series

Granular or honeycomb carbon adsorption boxes for low concentration organic exhaust and odour, used alone or with desorption.

Air volume
1,000 - 50,000 m³/h
Carbon type
Granular, honeycomb, pellet
Face velocity
0.3 - 0.8 m/s
Resistance
500 - 1,200 Pa
Packed spray scrubber tower for gas washing at a chemical plant

VOCs Exhaust Treatment

Spray Scrubber Tower (Wet Gas Washing)

GP-PP / GP-FRP Series

Counter-current packed scrubber for acid gas, alkali gas, dust and water soluble organics, in PP, FRP or stainless steel.

Air volume
2,000 - 100,000 m³/h
Tower diameter
Ø600 - Ø4,500 mm
Removal
Acid and alkali gas, dust, water soluble VOCs
Resistance
800 - 1,500 Pa
Catalytic combustion unit with activated carbon adsorption boxes and ductwork installed outdoors

VOCs Exhaust Treatment

Catalytic Combustion Unit (RCO / CO)

GP-RCO Series

Lower temperature catalytic oxidation for medium concentration organic exhaust, often combined with activated carbon desorption.

Air volume
2,000 - 60,000 m³/h
Reaction temperature
250 - 400 °C
Catalyst
Pt / Pd honeycomb ceramic
Fuel saving
Lower than thermal oxidation at same flow
Industrial centrifugal induced draft fan with motor on a common base frame

Industrial Dust Collection

Industrial Centrifugal Induced Draft Fan

GP-4-73 / GP-9-19 Series

High pressure and high temperature centrifugal fans for dust collection, flue gas extraction and material conveying systems.

Air volume
5,000 - 400,000 m³/h
Total pressure
1,000 - 12,000 Pa
Motor power
7.5 - 1,250 kW
Gas temperature
≤ 450 °C with hot gas design

Related technical articles

Selection notes for this equipment

Inquiry for UV Photocatalytic Odour Purifier

The product name and model are attached automatically. Add your gas volume, dust or pollutant data and required outlet value.

Prefer a direct channel? Email szamtx@163.com or scan the WhatsApp QR code in the floating button.

Tell us your plant condition, we will size the system

Send air volume, dust or gas data, temperature and available space. Our engineers reply with a configuration proposal and a budget quotation within 1 working day.

نستخدم ملفات تعريف ارتباط أساسية فقط لتشغيل هذا الموقع وحفظ لغة اختيارك وقرار الموافقة. لا يتم تعيين ملفات تعريف ارتباط للإعلان أو التتبع عبر المواقع. اقرأ سياسة الخصوصية سياسة الخصوصية.