GANGPUEnvironmental Technology
Industrial environmental protection equipment manufactured in a factory workshop

Product centre

Equipment Catalogue by Business Line

Five equipment families with technical parameters, applicable working conditions, customisation options and export packing details on every product page.

Showing 9 products in Industrial Dust Collection

Long bag offline pulse baghouse dust collector installed at an industrial plant

Industrial Dust Collection

Long Bag Offline Pulse Baghouse Dust Collector

GP-LCM / GP-PPC Series

Offline pulse jet baghouse for high dust load flue gas from sintering, blast furnace cast house, cement grinding and boiler tails.

Air volume
10,000 - 600,000 m³/h
Filter area
200 - 12,000 m²
Outlet concentration
≤ 10 mg/Nm³ (project dependent)
Operating temperature
≤ 260 °C with high-temp media
View detailsGet a quote
Wide spacing electrostatic precipitator at a power plant flue gas treatment system

Industrial Dust Collection

Wide-Spacing Electrostatic Precipitator

GP-CDPK / GP-WESP Series

Dry and wet electrostatic precipitators for fine dust, mist and aerosol where low resistance and stable outlet concentration matter.

Air volume
20,000 - 800,000 m³/h
Collecting area
50 - 9,000 m²
Outlet concentration
≤ 20 mg/Nm³ (dry), ≤ 10 mg/Nm³ (wet)
Resistance
200 - 400 Pa
View detailsGet a quote
Cartridge dust collector used for powder recovery in a fabrication workshop

Industrial Dust Collection

Cartridge Dust Collector for Fine Powder

GP-LT Series

Compact pleated cartridge collector for welding fume, grinding, powder coating and fine powder recovery in limited space.

Air volume
1,500 - 60,000 m³/h
Filter area
40 - 1,600 m²
Cartridge
Ø325 × 660 / 915 mm, polyester or PTFE membrane
Outlet concentration
≤ 5 mg/Nm³ with membrane media
View detailsGet a quote
Industrial centrifugal induced draft fan with motor on a common base frame

Industrial Dust Collection

Industrial Centrifugal Induced Draft Fan

GP-4-73 / GP-9-19 Series

High pressure and high temperature centrifugal fans for dust collection, flue gas extraction and material conveying systems.

Air volume
5,000 - 400,000 m³/h
Total pressure
1,000 - 12,000 Pa
Motor power
7.5 - 1,250 kW
Gas temperature
≤ 450 °C with hot gas design
View detailsGet a quote
Dust collector filter bags and wire cages arranged as replacement spare parts

Industrial Dust Collection

Filter Bags, Cages and Pulse Valves

GP-ACC Series

Complete dust collector spares: needle felt and membrane filter bags, galvanised or stainless cages, pulse valves and venturi nozzles.

Bag diameter
Ø120 - Ø160 mm
Bag length
1,000 - 8,000 mm
Media
Polyester, PPS, P84, PTFE, fibreglass, membrane
Pulse valve
1" - 3", 24 V DC or 220 V AC
View detailsGet a quote
Explosion-proof pulse baghouse dust collector serving a coal pulverising and injection plant

Industrial Dust Collection

Explosion-Proof Pulse Baghouse for Coal Dust

GP-MDC / GP-PPC-EX Series

Baghouse with explosion venting, inerting and anti-static media for pulverised coal injection, coal chemical and coke plant dust.

Air volume
8,000 - 200,000 m³/h
Filter area
150 - 4,000 m²
Outlet concentration
≤ 10 mg/Nm³ (project dependent)
Protection
Vent panels + inerting + anti-static media
View detailsGet a quote
Fume capture hood and baghouse dust collection system above a metallurgical induction furnace

Industrial Dust Collection

Metallurgical Furnace Fume Collection System

GP-LF / GP-ZL Series

Capture hood, spark arrester and baghouse with optional spray tower for induction furnace, aluminium melting furnace and rare earth electrolysis furnace fume.

Air volume
20,000 - 300,000 m³/h
Gas temperature
≤ 260 °C after cooling
Outlet concentration
≤ 10 mg/Nm³ (project dependent)
Capture hood
Roof, side or dog-house type
View detailsGet a quote
Hybrid electrostatic and bag filter dust collector installed at a power plant

Industrial Dust Collection

ESP-Baghouse Hybrid Dust Collector

GP-DDB Series

Electrostatic pre-collection stage combined with a bag filter section in one casing, used for high inlet load and ultra-low emission retrofits.

Air volume
100,000 - 800,000 m³/h
Outlet concentration
≤ 5 mg/Nm³ (project dependent)
System resistance
800 - 1,400 Pa
Electrostatic fields
2 - 4 fields upstream of bags
View detailsGet a quote
Silo top pulse dust collector mounted on the roof of a cement storage silo

Industrial Dust Collection

Silo Top Pulse Dust Collector

GP-DMC / GP-WAM Series

Compact vent filter for silos, hoppers and truck loading points, with cartridge or bag media and pneumatic pulse cleaning.

Air volume
800 - 6,000 m³/h
Filter area
6 - 60 m²
Outlet concentration
≤ 10 mg/Nm³ (project dependent)
Filter element
Cartridge or bag type
View detailsGet a quote

Customisation

Non-standard equipment built to your site

Most projects differ from the catalogue in dimensions, material, media and control. Tell us the constraint and we design around it.

  • Dimensions and flange connections matched to existing ductwork
  • Carbon steel, galvanised, 304 or 316L stainless construction
  • Filter media, packing and catalyst selected by gas chemistry
  • Voltage and frequency for Russian and Southeast Asian grids
  • Insulation, heat tracing and explosion protection measures
  • PLC panel with DCS interface and remote monitoring points

Not sure which model fits?

Send air volume, dust or gas data, temperature and available space. We return a configuration proposal with a budget quotation.

Prefer a direct channel? Email szamtx@163.com or scan the WhatsApp QR code in the floating button.

We use only essential cookies to keep this site working and to remember your language and consent choice. No advertising or cross-site tracking cookies are set. Read our Privacy Policy.