Product centre
Five equipment families with technical parameters, applicable working conditions, customisation options and export packing details on every product page.
Showing 26 products
Industrial Dust Collection
GP-LCM / GP-PPC Series
Offline pulse jet baghouse for high dust load flue gas from sintering, blast furnace cast house, cement grinding and boiler tails.
Industrial Dust Collection
GP-CDPK / GP-WESP Series
Dry and wet electrostatic precipitators for fine dust, mist and aerosol where low resistance and stable outlet concentration matter.
Industrial Dust Collection
GP-LT Series
Compact pleated cartridge collector for welding fume, grinding, powder coating and fine powder recovery in limited space.
Industrial Dust Collection
GP-4-73 / GP-9-19 Series
High pressure and high temperature centrifugal fans for dust collection, flue gas extraction and material conveying systems.
Industrial Dust Collection
GP-ACC Series
Complete dust collector spares: needle felt and membrane filter bags, galvanised or stainless cages, pulse valves and venturi nozzles.
VOCs Exhaust Treatment
GP-RTO-2 / GP-RTO-3 Chamber
Two or three chamber regenerative thermal oxidizer for medium to high concentration organic exhaust with heat recovery ceramic beds.
VOCs Exhaust Treatment
GP-RCO Series
Lower temperature catalytic oxidation for medium concentration organic exhaust, often combined with activated carbon desorption.
VOCs Exhaust Treatment
GP-PP / GP-FRP Series
Counter-current packed scrubber for acid gas, alkali gas, dust and water soluble organics, in PP, FRP or stainless steel.
VOCs Exhaust Treatment
GP-AC Series
Granular or honeycomb carbon adsorption boxes for low concentration organic exhaust and odour, used alone or with desorption.
Flue Gas Desulfurization & Denitrification
GP-FGD Series
Limestone-gypsum and sodium alkali wet desulfurization towers for coal fired boilers, sintering machines and industrial kilns.
Flue Gas Desulfurization & Denitrification
GP-SCR Series
Selective catalytic and non-catalytic reduction systems for NOx reduction in boilers, kilns and sintering flue gas.
Flue Gas Desulfurization & Denitrification
GP-ULE Series
Combined dust removal, desulfurization, denitrification and wet electrostatic polishing for ultra-low emission retrofits.
Industrial Energy Saving Retrofit
GP-VFD Series
Variable frequency drive retrofit for large induced draft fans, blowers and water pumps with throttling losses removed.
Industrial Energy Saving Retrofit
GP-EMS Service
Whole plant energy diagnosis covering compressed air, steam, fans, pumps, lighting and production line scheduling.
Bulk Material Conveying
GP-YJD-A / GP-YJD-B Series
Rotary airlock valve for continuous discharge from dust collector hoppers and silos while keeping the system airtight.
Bulk Material Conveying
GP-MS / GP-FU Series
Enclosed drag chain conveyor for dust, ash and granular material, horizontal or inclined with airtight casing.
Bulk Material Conveying
GP-NE / GP-TD Series
Chain or belt bucket elevator for vertical lifting of powder, granule and small lump material up to 60 m.
Bulk Material Conveying
GP-DTII / GP-TD75 Series
Fixed and mobile belt conveyors for long distance, high capacity transport of coal, ore, ash and aggregates.
Bulk Material Conveying
GP-LS / GP-WLS Series
Shafted and shaftless screw conveyors for powder, granule, sludge and sticky material in horizontal or inclined duty.
Industrial Dust Collection
GP-MDC / GP-PPC-EX Series
Baghouse with explosion venting, inerting and anti-static media for pulverised coal injection, coal chemical and coke plant dust.
Industrial Dust Collection
GP-LF / GP-ZL Series
Capture hood, spark arrester and baghouse with optional spray tower for induction furnace, aluminium melting furnace and rare earth electrolysis furnace fume.
Industrial Dust Collection
GP-DDB Series
Electrostatic pre-collection stage combined with a bag filter section in one casing, used for high inlet load and ultra-low emission retrofits.
Industrial Dust Collection
GP-DMC / GP-WAM Series
Compact vent filter for silos, hoppers and truck loading points, with cartridge or bag media and pneumatic pulse cleaning.
VOCs Exhaust Treatment
GP-UV Series
UV lamp and photocatalyst unit for low concentration odour and organic exhaust, used alone or downstream of scrubbing and adsorption.
Industrial Energy Saving Retrofit
GP-YSQ Series
Dry cleaning ejector train that returns blast furnace top pressure equalisation and bleed-off gas to the clean gas main instead of flaring it.
Bulk Material Conveying
GP-VF / GP-CF / GP-DM Series
Butterfly and louver dampers, manual or pneumatic slide gates and double flap discharge valves for duct balancing and airtight hopper discharge.
Customisation
Most projects differ from the catalogue in dimensions, material, media and control. Tell us the constraint and we design around it.
Utilizamos únicamente cookies esenciales para mantener el funcionamiento de este sitio y recordar su idioma y sus preferencias de consentimiento. No se utilizan cookies publicitarias ni de seguimiento entre sitios. Lea nuestra Política de privacidad.